précédent suivant

ALPhANOV sera présent aux salons BiOS et Photonics West 2018


Les salons BiOS et Photonics West se tiendront du 27 janvier au 1er février, à San Francisco.


Les salons BiOS et Photonics West seront l'occasion pour ALPhANOV de vous faire découvrir ses nouveautés. Pour cela nos ingénieurs auront le plaisir de vous accueillir à BiOS au stand 8440 et à Photonics West au stand 437 C.


Nos ingénieurs présenteront également lors du salon Photonics West leurs derniers projets à travers des conférences :


Lundi 29 janvier 2018: Solid State Lasers XXVII: Technology and Devices

Session 6: Pulsed Lasers II | 10h40 - 12h10

  • Pump-dependent brilliance limitations and thermal issues for designing thulium-doped crystalline amplifiers: Alain Jolly, Sebastien Vidal, Johan Boullet, ALPhANOV (France)


Mardi 30 janvier 2018: Fiber Lasers XV: Technology and Systems

Tuesday poster session: Posters-Tuesday | 18h00 - 20h00

  • 200-W single frequency laser based on short active double clad tapered fiber: Christophe Pierre, ALPhANOV (France); Germain Guiraud, Azur Light Systems (France); Jean-Paul Yehouessi, ALPhANOV (France); Giorgio Santarelli, Lab. Photonique, Numérique et Nanosciences (France); Johan Boullet, ALPhANOV (France); Nicholas Traynor, Azur Light Systems (France)
  • Direct amplification to millijoule level of a nanosecond passively Q-switched Yb:YAG microchip laser at 1030 nm in an Yb-doped rod-type fiber amplifier: Loïc Deyra, ALPhANOV (France); Marie-Alicia Malleville, XLIM Institut de Recherche (France) and Eolite Systems (France); William Renard, Eolite Lasers (France); Paul-Henri Pioger, Horus Laser S.A.S. (France); Johan Boullet, ALPhANOV (France)


Jeudi 1er février 2018: Components and Packaging for Laser Systems IV

Session 7: High Power/Energy Laser Components and Packaging II | 10h30 - 12h15

  • New method approach to estimate the thermal volume flow deposited within the crystal over laser pumping: Alexandre Godin, ALPhANOV (France); Abdelhak Saci, Amplitude Systèmes (France); Loïc Deyra, ALPhANOV (France); Antoine Courjaud, Amplitude Systèmes (France); Johan Boullet, ALPhANOV (France); Bastien Gavory, Amplitude Systèmes (France)


Session 8: High Power/Energy Laser Components and Packaging III | 13h30 - 15h15

  • Laser-induced damage threshold of Yb:YAG crystals at stretched 150- ps pulses: Maria Jose Milla Rodrigo, Roman Diaz, Loïc Deyra, ALPhANOV (France); Damien Sangla, Magali Durand, Pierre Sevillano, Antoine Courjaud, Amplitude Systèmes (France); Johan Boullet, ALPhANOV (France)


Lundi 29 janvier 2018: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIII

Session 2: Industrial Applications II: Towards Digital Photonics Production | 10h50 - 12h30

  • Correlation between ablation efficiency, surface morphology, and multipass capability using a 100-W 10-MHz ultrafast laser: John Lopez, Ctr. Lasers Intenses et Applications (France) and ALPhANOV (France); Girolamo Mincuzzi, ALPhANOV (France); Konstantin Mishchik, Eric Audouard, Eric P. Mottay, Amplitude Systèmes (France); Rainer Kling, ALPhANOV (France)


Mercredi 31 janvier 2018: Laser-based Micro- and Nanoprocessing XII

Session 5: Large-area Micro/Nano Structuring and Laser Interference Patterning | 8h20 - 9h50

  • 2D laser induced periodic surface structures with double crosspolarized pulses: Fotis Fraggelakis, Girolamo Mincuzzi, ALPhANOV (France); John Lopez, Univ. de Bordeaux (France) and Ctr. Lasers Intenses et Applications (France) and Ctr. National de la Recherche Scientifique (France); Inka B. Manek-Honninge, Univ. de Bordeaux (France); Rainer Kling, ALPhANOV (France)


Jeudi 1er février 2018: Laser-based Micro- and Nanoprocessing XII

Session 8: Direct-write Processing, Ablation, and Surface Modification II | 8h00 - 10h00

  • New fast galvo scanner head for high throughput micromachining: Girolamo Mincuzzi, Alice Rebiere, Marc Faucon, Rainer Kling, ALPhANOV (France)


Dimanche 28 janvier 2018: Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XVIII

Session 8: Surface Structuring with Ultrafast Lasers | 13h50 - 15h30

  • Surface functionalization of metal surfaces by large-area USP laser texturing: Laura Gemini, ALPhANOV (France)