PDM series

Single-mode laser source generating pulses from 1ns to CW, from one-shot to 250MHz with extremely low jitter (<8ps)

PDM series

Single-mode laser source generating pulses from 1ns to CW, from one-shot to 250MHz with extremely low jitter (<8ps)

PDM series

Single-mode laser source generating pulses from 1ns to CW, from one-shot to 250MHz with extremely low jitter (<8ps)

PDM series

Single-mode laser source generating pulses from 1ns to CW, from one-shot to 250MHz with extremely low jitter (<8ps)
précédent suivant

Single-mode laser source for full temporal agility

The PDM series consists of laser modules which generate optical pulses from input TTL/LVTTL digital signal.

From single-shot to CW, with pulse length from 1ns to any required pulse-burst configuration, the PDM series offers the best temporal flexibilty on the laser market.

 

 The PDM Series includes 4 models:

  • PDM+ and PDM+HP : Single-mode output fiber; High power (up to 3.5W);
  • PDM4+ and PDM4+ HP: Dual Wavelengths (980 and 1064 nm); Single-mode output fiber; High power (up to 10W)

Key features:

  • Single-shot, burst mode or CW operation
  • Up to 10W peak power
  • Pulse duration: 1 nsec to CW (FWHM)
  • From one-shot to 250 MHz repetition rate
  • Extremely low jitter (<8ps)
  • Large range of wavelengths 
  • Excellent beam quality
  • Low N.A.
  • Software et DLL included for computer driving

Key applications:

  • MOPA architecture
  • Low power micromachining
  • Laser development
  • Non destructive control
  • Telemetry
  • Doppler measurements
  • Metrology
  • Semiconductor testing
  PDM PDM 4  PDM Multimode PDM Multimode HP
Optical specifications
    
Peak power Up to 2W Up to 6W

Up to
120 W

Up to
200 W
Pulse width From 1 ns to CW From 100 ns to 1 µs
 Available wavelengths  808, 976, 1030, 1064, 1075 nm *  Deux parmi 808, 976 et 1064 nm *  976 nm 976 nm
 Operating mode  Pulsed and CW   Pulsed
 Beam quality   M2 < 1.2 105 µm
NA = 0.12
150 µm
NA = 0.22
 Command interface   TTL/LVTTL **   TTL
 Output fiber   SM/PM MM 105 µm
NA = 0,12
MM 150 µm
NA = 0.22
Electrical specifications
    
 Operating voltage     12-15 Vdc (OEM) - 110/220 V - ac/dc converter included
 Input impedance     50 ohms

 

* Other available wavelengths: 845, 1310, 1480, 1550 nm, ...

** LVDS or other on demand (LVPECL, CML, LVS)





 

 


Download the datasheet

Follow us

 

 

Job offers