LASER World of PHOTONICS 2019
24 - 27 June 2019 / Munich
ALPhANOV is attending the LASER World of PHOTONICS 2019 exhibition. Come and discover our new products at Booth B3.421 and our latest works through our engineers’ talks.
Come and listen to our ingeniers who will present our latest works:
- Robust all-ber 200W single frequency laser at 1064 nm with low intensity noise, Clément Dixneuf, Germain Guiraud, Yves-Vincent Bardin, Giorgio Santarelli, Nicholas Traynor, Christophe Pierre, and Johan Boullet
(CLEO®/Europe-EQEC 2019 > CJ-P: CJ Poster session)
Sunday June 23th / 13h00 | Hall B0
- 180 W single-mode laser operation of an Yb:YAG thin disk using a robust direct-bonding process, Loïc Deyra, Ramatou Bello Doua, Maria Jose Milla, Johan Boullet, Paula Heu, David Follman, Garrett D. Cole, Abdelhak Saci, Jean Gabriel Brisset, and Antoine Courjaud
(CLEO®/Europe-EQEC 2019 > CA-5: Thin disk lasers)
Monday June 24th / 12h15-12h30 | ROOM 13a ICM
- Guiding prostate cancer biopsies using time resolved 3D uorescence tomography combined with ultrasound imaging, Charles Handschin, Coralie Genevois, Sébastien Vidal, Guillaume Machinet, Johan Boullet, Mathieu Perriollat, Olivier Redon, Franck Couillaud, and Nicolas Grenier
(CLEO®/Europe-EQEC 2019 > CL-1: Clinical applications)
Monday June 24th / 11h15-11h30 | ROOM Osterseen - ICM 2nd Floor
- Giant pulse at 2 µm in polarization maintaining silica step-index fiber, Philippe Morin, Simon Boivinet, Jean-Paul Yehoussi, Tiphaine Berberian, Frédéric Druon, Sébastien Vidal, Guillaume Machinet, Yoann Zaouter, and Johan Boullet
(CLEO®/Europe-EQEC 2019 > EF-P: EF Poster session)
Tuesday June 25th / 13h00 | Hall B0
- Additive Manufacturing by Wire based Laser Metal Deposition: Mathieu VALENTIN, Rainer KLING, Christophe ARNAUD
(Lasers in Manufacturing (LiM) > Laser Metal Deposition)
Thursday June 27th / 9h00-9h15 | ICM ground floor Room 3
- Antibacterial surfaces produced by high-average power USP laser: Laura GEMINI, Marc FAUCON, Adrian H.A. LUTEY, Luca ROMOLI, Rainer KLING
(Lasers in Manufacturing (LiM) > Surface Functionalization)
Thursday June 27th / 11h45-12h00 | ICM ground floor Room 2
- 29 W diraction limited monolithic ytterbium doped ber laser system operating at 976 nm in the continuous wave regime, Nicolas Valero, Christophe Feral, Jérôme Lhermite, Stephane Petit, Romain Royon, Yves Bardin, Johan Boullet, Antoine Proulx, Yves Taillon, and Eric Cormier
(CLEO®/Europe-EQEC 2019 > CJ-13: Raman and NIR fiber lasers)
Thursday June 27th / 15h00-15h15 | ROOM 1 ICM
Midest
5 - 8 March 2019 / Lyon
ALPhANOV will participate in the Midest fair, from March 5th to 8th, 2019, in Lyon (Parc des Expositions Eurexpo). Take the opportunity to discover all our new products and come talk with our engineers at booth 6F12.
Photonics West 2019
5 - 7 February 2019 / San Francisco
ALPhANOV is attending the Photonics West 2019 exhibition. Come and discover our new products on our booth (booth 1059 F).
Come and listen to our engineers who will present our latest works:
Saturday, February 2nd 2019
Session 1: Novel Applications of Lasers and Light in Biomedicine | 8:00 – 10:00
- Biofabrication of a vascular network by ultra-short laser pulses, Isabel Verit, ALPhANOV (France) and INSERM, Univ. of Bordeaux (France)
Tuesday, February 5th 2019
Session 2: Supercontinuum Sources | 10:30 – 12:00
- 3 W Mid-IR supercontinuum extended up to 4.6 μm based on an all-PM thulium doped fiber gain-switch laser seeding an InF3 fiber, Jean-Paul Yehouessi, Sebastien Vidal, ALPhANOV (France); Jean-Yves Carree, Laurine Bodin, Samuel Poulain, Le Verre Fluore (France); Guillaume Huss, LEUKOS (France); Johan Boullet, ALPhANOV (France)
Session 4 : Frontier in Laser Micromachining | 8:00 – 10:20
- Glass drilling using ultrafast pulses with variable delay in the femtosecond and picosecond range, Kevin Gaudfrin, ALPhANOV (France) and Univ. Bordeaux (France) and Ctr. Lasers Intenses et Applications (France); John Lopez, Guillaume Duchateau, Univ. de Bordeaux (France) and Ctr. Lasers Intenses et Applications (France); Rainer Kling, ALPhANOV (France); Konstantin Mishchik, Amplitude Systemes (France)
Poster session: 18:00 – 20:00
- 180 W single mode laser operation of an Yb:YAG thin disk using a robust direct-bonding process, Ramatou Bello, Loïc Deyra, Maria Milla-Rodrigo, Johan Boullet, ALPhANOV (France); Paula Heu, David Follman, Garett Cole, Crystalline Mirror Solutions, LLC (USA); Abdelhak Saci, Jean-Gabriel Brisset, Antoine Courjaud, Amplitude Systèmes (France)
Wednesday, February 6th 2019
Session 7: High Power/Energy Laser Components and Packaging I | 8:30 – 10:00
- Photonic crystal fiber-based components for high power industrial Fs laser applications (Invited Paper), Johan Boullet, Simon Boivinet, Christophe Pierre, Guillaume Machinet, Hugo Lecommandoux, Emmanuel Chalumeau, Cyril Vincont, Kevin Robin, Michael Berisset, ALPhANOV (France)
Session 9: High Power/Energy Laser Components and Packaging III | 13:30 – 15:20
- Ultra-high brightness, low insertion loss, kW-class co and contra propagative 6+1:1 combiner, Yves-Vincent Bardin, Christophe Pierre, Johan Boullet, ALPhANOV (France)
Session 11: Ultrafast Fiber Lasers and Amplifiers II | 16:00 – 17:50
- Sub-50 fs 3.5 nJ pulses at 792 nm generated by frequency doubling of an all-PM fiber laser for Ti:sapphire injection, Simon Boivinet, Philippe Morin, Jean-Paul Yehouessi, Sebastien Vidal, Guillaume Machinet, Johan Boullet, ALPhANOV (France)
Thursday, February 7th 2019
Session 10: High Speed Laser Beam Engineering Systems | 10:40 – 12:10
- Beam Engineering for high throughput material processing with high power, femtosecond lasers, Girolamo Mincuzzi, Alice Rebiere, Baptiste Le Goaec, Marc Faucon, Rainer Kling, ALPhANOV (France)
