Aller au contenu principal


ALPhANOV sera présent aux salons BiOS et Photonics West 2018


Les salons BiOS et Photonics West seront l'occasion pour ALPhANOV de vous faire découvrir ses nouveautés. Pour cela nos ingénieurs auront le plaisir de vous accueillir à BiOS au stand 8440 et à Photonics West au stand 437 C.

Nos ingénieurs présenteront également lors du salon Photonics West leurs derniers projets à travers des conférences :

Lundi 29 janvier 2018: Solid State Lasers XXVII: Technology and Devices

Session 6: Pulsed Lasers II | 10h40 - 12h10
•    Pump-dependent brilliance limitations and thermal issues for designing thulium-doped crystalline amplifiers: Alain Jolly, Sebastien Vidal, Johan Boullet, ALPhANOV (France)

Mardi 30 janvier 2018: Fiber Lasers XV: Technology and Systems

Tuesday poster session: Posters-Tuesday | 18h00 - 20h00
•    200-W single frequency laser based on short active double clad tapered fiber: Christophe Pierre, ALPhANOV (France); Germain Guiraud, Azur Light Systems (France); Jean-Paul Yehouessi, ALPhANOV (France); Giorgio Santarelli, Lab. Photonique, Numérique et Nanosciences (France); Johan Boullet, ALPhANOV (France); Nicholas Traynor, Azur Light Systems (France)
•    Direct amplification to millijoule level of a nanosecond passively Q-switched Yb:YAG microchip laser at 1030 nm in an Yb-doped rod-type fiber amplifier: Loïc Deyra, ALPhANOV (France); Marie-Alicia Malleville, XLIM Institut de Recherche (France) and Eolite Systems (France); William Renard, Eolite Lasers (France); Paul-Henri Pioger, Horus Laser S.A.S. (France); Johan Boullet, ALPhANOV (France)

Jeudi 1er février 2018: Components and Packaging for Laser Systems IV

Session 7: High Power/Energy Laser Components and Packaging II | 10h30 - 12h15
•    New method approach to estimate the thermal volume flow deposited within the crystal over laser pumping: Alexandre Godin, ALPhANOV (France); Abdelhak Saci, Amplitude Systèmes (France); Loïc Deyra, ALPhANOV (France); Antoine Courjaud, Amplitude Systèmes (France); Johan Boullet, ALPhANOV (France); Bastien Gavory, Amplitude Systèmes (France)
Session 8: High Power/Energy Laser Components and Packaging III | 13h30 - 15h15
•    Laser-induced damage threshold of Yb:YAG crystals at stretched 150- ps pulses: Maria Jose Milla Rodrigo, Roman Diaz, Loïc Deyra, ALPhANOV (France); Damien Sangla, Magali Durand, Pierre Sevillano, Antoine Courjaud, Amplitude Systèmes (France); Johan Boullet, ALPhANOV (France)

Lundi 29 janvier 2018: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIII

Session 2: Industrial Applications II: Towards Digital Photonics Production | 10h50 - 12h30
•    Correlation between ablation efficiency, surface morphology, and multipass capability using a 100-W 10-MHz ultrafast laser: John Lopez, Ctr. Lasers Intenses et Applications (France) and ALPhANOV (France); Girolamo Mincuzzi, ALPhANOV (France); Konstantin Mishchik, Eric Audouard, Eric P. Mottay, Amplitude Systèmes (France); Rainer Kling, ALPhANOV (France)

Mercredi 31 janvier 2018: Laser-based Micro- and Nanoprocessing XII

Session 5: Large-area Micro/Nano Structuring and Laser Interference Patterning | 8h20 - 9h50
•    2D laser induced periodic surface structures with double crosspolarized pulses: Fotis Fraggelakis, Girolamo Mincuzzi, ALPhANOV (France); John Lopez, Univ. de Bordeaux (France) and Ctr. Lasers Intenses et Applications (France) and Ctr. National de la Recherche Scientifique (France); Inka B. Manek-Honninge, Univ. de Bordeaux (France); Rainer Kling, ALPhANOV (France)

Jeudi 1er février 2018: Laser-based Micro- and Nanoprocessing XII

Session 8: Direct-write Processing, Ablation, and Surface Modification II | 8h00 - 10h00
•    New fast galvo scanner head for high throughput micromachining: Girolamo Mincuzzi, Alice Rebiere, Marc Faucon, Rainer Kling, ALPhANOV (France)

Dimanche 28 janvier 2018: Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XVIII

Session 8: Surface Structuring with Ultrafast Lasers | 13h50 - 15h30
•    Surface functionalization of metal surfaces by large-area USP laser texturing: Laura Gemini, ALPhANOV (France)

Nos dernières actualités