Skip to main content

News

ALPhANOV will be present at BiOS and Photonics West 2018 exhibitions

01/12/2018

ALPhANOV will be present at BiOS and Photonics West 2018 exhibitions from January 27th to February 1st in San Francisco, CA, USA.

This will be an opportunity for ALPhANOV to introduce you to its new products. Our engineers will be pleased to welcome you to BiOS - Booth 8440 and Photonics West - Booth 437 C.

Come visit our booths and attend the conference talks where our engineers will present our latest works:

Monday 29 january 2018: Solid State Lasers XXVII: Technology and Devices
Session 6: Pulsed Lasers II | 10:40 am to 12:10 pm

  • Pump-dependent brilliance limitations and thermal issues for designing thulium-doped crystalline amplifiers: Alain Jolly, Sebastien Vidal, Johan Boullet, ALPhANOV (France)


Tuesday 30 january 2018: Fiber Lasers XV: Technology and Systems
Tuesday poster session: Posters-Tuesday | 6:00 pm to 8:00 pm

  •   200-W single frequency laser based on short active double clad tapered fiber: Christophe Pierre, ALPhANOV (France); Germain Guiraud, Azur Light Systems (France); Jean-Paul Yehouessi, ALPhANOV (France); Giorgio Santarelli, Lab. Photonique, Numérique et Nanosciences (France); Johan Boullet, ALPhANOV (France); Nicholas Traynor, Azur Light Systems (France)
  • Direct amplification to millijoule level of a nanosecond passively Q-switched Yb:YAG microchip laser at 1030 nm in an Yb-doped rod-type fiber amplifier: Loïc Deyra, ALPhANOV (France); Marie-Alicia Malleville, XLIM Institut de Recherche (France) and Eolite Systems (France); William Renard, Eolite Lasers (France); Paul-Henri Pioger, Horus Laser S.A.S. (France); Johan Boullet, ALPhANOV (France)


Thursday 1 february 2018: Components and Packaging for Laser Systems IV
Session 7: High Power/Energy Laser Components and Packaging II | 10:30 am to 12:15 pm

 

  • New method approach to estimate the thermal volume flow deposited within the crystal over laser pumping: Alexandre Godin, ALPhANOV (France); Abdelhak Saci, Amplitude Systèmes (France); Loïc Deyra, ALPhANOV (France); Antoine Courjaud, Amplitude Systèmes (France); Johan Boullet, ALPhANOV (France); Bastien Gavory, Amplitude Systèmes (France)

 
Session 8: High Power/Energy Laser Components and Packaging III | 1:30 pm to 3:15 pm

  • Laser-induced damage threshold of Yb:YAG crystals at stretched 150- ps pulses: Maria Jose Milla Rodrigo, Roman Diaz, Loïc Deyra, ALPhANOV (France); Damien Sangla, Magali Durand, Pierre Sevillano, Antoine Courjaud, Amplitude Systèmes (France); Johan Boullet, ALPhANOV (France)


Monday 29 january 2018: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIII
Session 2: Industrial Applications II: Towards Digital Photonics Production | 10:50 am to 12:30 pm

  • Correlation between ablation efficiency, surface morphology, and multipass capability using a 100-W 10-MHz ultrafast laser: John Lopez, Ctr. Lasers Intenses et Applications (France) and ALPhANOV (France); Girolamo Mincuzzi, ALPhANOV (France); Konstantin Mishchik, Eric Audouard, Eric P. Mottay, Amplitude Systèmes (France); Rainer Kling, ALPhANOV (France)


Wednesday 31 january 2018: Laser-based Micro- and Nanoprocessing XII
Session 5: Large-area Micro/Nano Structuring and Laser Interference Patterning | 8:20 am to 9:50 am

  • 2D laser induced periodic surface structures with double crosspolarized pulses: Fotis Fraggelakis, Girolamo Mincuzzi, ALPhANOV (France); John Lopez, Univ. de Bordeaux (France) and Ctr. Lasers Intenses et Applications (France) and Ctr. National de la Recherche Scientifique (France); Inka B. Manek-Honninge, Univ. de Bordeaux (France); Rainer Kling, ALPhANOV (France)

 

Thursday 1 february 2018: Laser-based Micro- and Nanoprocessing XII
Session 8: Direct-write Processing, Ablation, and Surface Modification II | 8:00 am to 10:00 am

  • New fast galvo scanner head for high throughput micromachining: Girolamo Mincuzzi, Alice Rebiere, Marc Faucon, Rainer Kling, ALPhANOV (France)

 

Sunday 28 january 2018: Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XVIII
Session 8: Surface Structuring with Ultrafast Lasers | 1:50 pm to 3:30 pm

  • Surface functionalization of metal surfaces by large-area USP laser texturing: Laura Gemini, ALPhANOV (France)

Our last news